X   Сообщение сайта
(Сообщение закроется через 3 секунды)



 

Здравствуйте, гость (

| Вход | Регистрация )

2 страниц V   1 2 >
Открыть тему
Тема закрыта
> Вопрос по Webmin
Zellegius
Zellegius
Topic Starter сообщение 19.5.2010, 17:39; Ответить: Zellegius
Сообщение #1


Ошибка при запуске apache :

Starting web server: apache2[Wed May 19 15:21:30 2010] [error] VirtualHost ***.**.***.**:0 -- mixing * ports and non-* ports with a NameVirtualHost address is not supported, proceeding with undefined results
[Wed May 19 15:21:30 2010] [warn] NameVirtualHost ***.**.***.**:80 has no VirtualHosts
(98)Address already in use: make_sock: could not bind to address [::]:80
(98)Address already in use: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down
Unable to open logs
failed!

Нажимая "Запуск apache" выдает ошибку сверху.

Я так понимаю, из за этого и не открывается сайт (выдает 502 Bad Gateway)

Помогите разобраться плиз.

П.С.
Стоит Debian 5 64bit

Сообщение отредактировал Zellegius - 19.5.2010, 17:40
0
Вернуться в начало страницы
 
Ответить с цитированием данного сообщения
500
500
сообщение 19.5.2010, 17:42; Ответить: 500
Сообщение #2


Давно как то стоял у меня вебмин на мажорах...
Ты случайно конфигурационный файл апача не трогал? (это где виртуальные хосты прописаны)
Вернуться в начало страницы
 
Ответить с цитированием данного сообщения
Lordie
Lordie
сообщение 19.5.2010, 17:43; Ответить: Lordie
Сообщение #3


Что-то уже висит на вышеуказанных портах smile.gif помню, было дело, сталкивался с таким же годик назад
Вернуться в начало страницы
 
Ответить с цитированием данного сообщения
bond1211
bond1211
сообщение 19.5.2010, 17:44; Ответить: bond1211
Сообщение #4


написано же, не могу запустится потому что 80 порт занят, вот посмотри кем порт занят, если ставил nginx к примеру, то поменяй порт у апатча


--------------------


Поблагодарили: (1)
Вернуться в начало страницы
 
Ответить с цитированием данного сообщения
Zellegius
Zellegius
Topic Starter сообщение 19.5.2010, 17:47; Ответить: Zellegius
Сообщение #5


(500 @ 19.5.2010, 17:42) *
Давно как то стоял у меня вебмин на мажорах...
Ты случайно конфигурационный файл апача не трогал? (это где виртуальные хосты прописаны)


Нет.

(bond1211 @ 19.5.2010, 17:44) *
написано же, не могу запустится потому что 80 порт занят, вот посмотри кем порт занят, если ставил nginx к примеру, то поменяй порт у апатча


да стоит.

А как поменять порт?)
Вернуться в начало страницы
 
Ответить с цитированием данного сообщения
bond1211
bond1211
сообщение 19.5.2010, 17:55; Ответить: bond1211
Сообщение #6


Zellegius, в ЛС пиши


--------------------
Вернуться в начало страницы
 
Ответить с цитированием данного сообщения
Nunkomm
Nunkomm
сообщение 19.5.2010, 18:00; Ответить: Nunkomm
Сообщение #7


(Zellegius @ 19.5.2010, 16:47) *
Нет.



да стоит.

А как поменять порт?)



ТС, конфигурационные файлы Apache и nginx покажите.
Вернуться в начало страницы
 
Ответить с цитированием данного сообщения
bond1211
bond1211
сообщение 19.5.2010, 18:03; Ответить: bond1211
Сообщение #8


легче тут отписать:
- конфиг Apache

находим Listen 80 и меняем на Listen 127.0.0.1:8080 ( привык на локахост..безопаснее)
- конфиг nginx
находим секцию
server {
listen site.ru:80; <-обратить внимание..
server_name site.ru;
location / {
proxy_pass http://127.0.0.1:8080; <- проксирование на apache
proxy_redirect off;
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
}
location ~* ^.+\.(jpg|jpeg|gif|png|svg|js|css|mp3|ogg|mpe?g|avi|zip|gz|bz2?|rar|html|htm)$ { <-по примеру дописать какие файлы отдавать будет nginx
root /var/www/site.ru; <- путь до места где сайт валяется
access_log /var/www/httpd-logs/site.ru.access.log; <-где валяются логи
}
}

Сообщение отредактировал bond1211 - 19.5.2010, 18:04


--------------------


Поблагодарили: (1)
Вернуться в начало страницы
 
Ответить с цитированием данного сообщения
Zellegius
Zellegius
Topic Starter сообщение 19.5.2010, 20:57; Ответить: Zellegius
Сообщение #9


apache
#
# Based upon the NCSA server configuration files originally by Rob McCool.
#
# This is the main Apache server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See http://httpd.apache.org/docs/2.2/ for detailed information about
# the directives.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.  
#
# The configuration directives are grouped into three basic sections:
#  1. Directives that control the operation of the Apache server process as a
#     whole (the 'global environment').
#  2. Directives that define the parameters of the 'main' or 'default' server,
#     which responds to requests that aren't handled by a virtual host.
#     These directives also provide default values for the settings
#     of all virtual hosts.
#  3. Settings for virtual hosts, which allow Web requests to be sent to
#     different IP addresses or hostnames and have them handled by the
#     same Apache server process.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "/var/log/apache2/foo.log"
# with ServerRoot set to "" will be interpreted by the
# server as "//var/log/apache2/foo.log".
#

### Section 1: Global Environment
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
#

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE!  If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at <URL:http://httpd.apache.org/docs-2.1/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
ServerRoot "/etc/apache2"

#
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#
#<IfModule !mpm_winnt.c>
#<IfModule !mpm_netware.c>
LockFile /var/lock/apache2/accept.lock
#</IfModule>
#</IfModule>

#
# PidFile: The file in which the server should record its process
# identification number when it starts.
# This needs to be set in /etc/apache2/envvars
#
PidFile ${APACHE_PID_FILE}

#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15

##
## Server-Pool Size Regulation (MPM specific)
##

# prefork MPM
# StartServers: number of server processes to start
# MinSpareServers: minimum number of server processes which are kept spare
# MaxSpareServers: maximum number of server processes which are kept spare
# MaxClients: maximum number of server processes allowed to start
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_prefork_module>
    StartServers          5
    MinSpareServers       5
    MaxSpareServers      10
    MaxClients          150
    MaxRequestsPerChild   0
</IfModule>

# worker MPM
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_worker_module>
    StartServers          2
    MaxClients          150
    MinSpareThreads      25
    MaxSpareThreads      75
    ThreadsPerChild      25
    MaxRequestsPerChild   0
</IfModule>

# These need to be set in /etc/apache2/envvars
User ${APACHE_RUN_USER}
Group ${APACHE_RUN_GROUP}

#
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives.  See also the AllowOverride
# directive.
#

AccessFileName .htaccess

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<Files ~ "^\.ht">
    Order allow,deny
    Deny from all
</Files>

#
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain


#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off

# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog /var/log/apache2/error.log

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

# Include module configuration:
Include /etc/apache2/mods-enabled/*.load
Include /etc/apache2/mods-enabled/*.conf

# Include all the user configurations:
Include /etc/apache2/httpd.conf

# Include ports listing
Include /etc/apache2/ports.conf

#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
# If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i
#
LogFormat "%v:%p %h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

#
# Define an access log for VirtualHosts that don't define their own logfile
CustomLog /var/log/apache2/other_vhosts_access.log vhost_combined

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# Putting this all together, we can internationalize error responses.
#
# We use Alias to redirect any /error/HTTP_<error>.html.var response to
# our collection of by-error message multi-language collections.  We use
# includes to substitute the appropriate text.
#
# You can modify the messages' appearance without changing any of the
# default HTTP_<error>.html.var files by adding the line:
#
#   Alias /error/include/ "/your/include/path/"
#
# which allows you to create your own set of files by starting with the
# /usr/share/apache2/error/include/ files and copying them to /your/include/path/,
# even on a per-VirtualHost basis.  The default include files will display
# your Apache version number and your ServerAdmin email address regardless
# of the setting of ServerSignature.
#
# The internationalized error documents require mod_alias, mod_include
# and mod_negotiation.  To activate them, uncomment the following 30 lines.

#    Alias /error/ "/usr/share/apache2/error/"
#
#    <Directory "/usr/share/apache2/error">
#        AllowOverride None
#        Options IncludesNoExec
#        AddOutputFilter Includes html
#        AddHandler type-map var
#        Order allow,deny
#        Allow from all
#        LanguagePriority en cs de es fr it nl sv pt-br ro
#        ForceLanguagePriority Prefer Fallback
#    </Directory>
#
#    ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
#    ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
#    ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
#    ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
#    ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
#    ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
#    ErrorDocument 410 /error/HTTP_GONE.html.var
#    ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
#    ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
#    ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
#    ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
#    ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
#    ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
#    ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
#    ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
#    ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
#    ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var



# Include of directories ignores editors' and dpkg's backup files,
# see README.Debian for details.

# Include generic snippets of statements
Include /etc/apache2/conf.d/

# Include the virtual host configurations:
Include /etc/apache2/sites-enabled/

NameVirtualHost 188.40.110.15:8080
NameVirtualHost 188.40.110.15:80
NameVirtualHost 188.40.110.15:21
<Directory /var/www/support/public_html>
        FCGIWrapper /var/www/support/php-bin/php .php
        Options +ExecCGI
</Directory>
<VirtualHost 188.40.110.15:8080>
        ServerName 188.40.110.15
        DocumentRoot /var/www/support/public_html/
        SuexecUserGroup support support
        CustomLog /var/log/apache2/188.40.110.15.access.log combined
        ErrorLog /var/log/apache2/188.40.110.15.error.log
#        ServerAlias
        ServerAdmin webmaster@localhost
        ScriptAlias /cgi-bin/ /var/www/support/cgi-bin/
        ScriptAlias /php-bin/ /var/www/support/php-bin/
#        AddHandler php-cgi .php .php3 .php4 .php5 .phtml
     AddHandler fcgid-script .php
</VirtualHost>


ngix
user www-data;
worker_processes  1;

error_log  /var/log/nginx/error.log;
pid        /var/run/nginx.pid;

events {
    worker_connections  1024;
}

http {
    include       /etc/nginx/mime.types;
    default_type  application/octet-stream;
    server_names_hash_bucket_size 64;

    access_log    /var/log/nginx/access.log;

    sendfile        on;
    #tcp_nopush     on;

    #keepalive_timeout  0;
    keepalive_timeout  65;
    tcp_nodelay        on;

    gzip  on;

    include /etc/nginx/conf.d/*.conf;
    include /etc/nginx/sites-enabled/*;

        server {
                listen 188.40.110.15:80 default sndbuf=524288;
                server_name 188.40.110.15;

                location ~* ^/(webstat/|awstats|webmail/|myadmin/|manimg/) {
                        proxy_pass http://188.40.110.15:8080;
                        proxy_redirect http://188.40.110.15:8080/ /;
                        proxy_set_header Host $host;
                        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
                        proxy_set_header X-Real-IP $remote_addr;
                }
                location / {
                        proxy_pass http://188.40.110.15:8080;
                        proxy_redirect http://188.40.110.15:8080/ /;
                        proxy_set_header Host $host;
                        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
                        proxy_set_header X-Real-IP $remote_addr;
                }
                location ~* ^.+\.(jpg|jpeg|gif|png|svg|js|css|mp3|ogg|mpe?g|avi|zip|gz|bz2?|rar)$ {
                        root /var/www/support/public_html/;
                        access_log /var/log/apache2/188.40.110.15.access.log;
                        access_log off;
                        error_page 404 = @fallback;
                }
                location @fallback {
                        proxy_pass http://188.40.110.15:8080;
                        proxy_set_header Host $host;
                        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
                        proxy_set_header X-Real-IP $remote_addr;
                }
        }
}


я что то недоганяю(
Вернуться в начало страницы
 
Ответить с цитированием данного сообщения
Lordie
Lordie
сообщение 19.5.2010, 21:03; Ответить: Lordie
Сообщение #10


listen 188.40.110.15:80 default sndbuf=524288;

Невероятно сложно = ))
Вернуться в начало страницы
 
Ответить с цитированием данного сообщения
2 страниц V   1 2 >
Открыть тему
Тема закрыта
1 чел. читают эту тему (гостей: 1, скрытых пользователей: 0)
Пользователей: 0


Свернуть

> Похожие темы

  Тема Ответов Автор Просмотров Последний ответ
Открытая тема (нет новых ответов) Вопрос - платное размещение баннеров на сайте
10 WGN 3125 14.12.2020, 14:20
автор: Peterson
Открытая тема (нет новых ответов) Вопрос по рекламе в "инстаграме"
Только активные аккаунты могут создавать или редактировать рекламу
8 Zubkov 16020 17.1.2020, 17:49
автор: Forumacc
Горячая тема (нет новых ответов) Тема имеет прикрепленные файлыВопрос-ответ о работе форума
307 dos1k 43056 9.11.2019, 17:59
автор: heks
Открытая тема (нет новых ответов) Жена логопед, собрался ей приводить клиентов. Встал вопрос, куда приводить.
В теме перечисление доступного мне продвижения, но с чего начать?
9 memeplex 3689 16.2.2019, 15:45
автор: zyzy
Открытая тема (нет новых ответов) Предлагаю размещение качественных ссылок на форумах и сервисах вопрос ответ
21 ПроФФи 4960 2.3.2018, 20:56
автор: ShowPrint


 



RSS Текстовая версия Сейчас: 28.3.2024, 17:42
Дизайн